Fireye provides a variety of burner control flame safeguard and combustion controls to the HVAC marketplace. Our BurnerPRO™, BurnerLogix™, Flame-Monitor™ and MicroM families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired makeup air units and commercial hot water heaters.
BurnerPRO controls are the ideal solution for both new installations and retrofit of Siemens LFL controls. Many BurnerPRO models are func...
The BurnerLogix flame safeguard controler boast a sophisticated array of features designed to enhance efficiency, safety, and ease of use...
The BurnerLogix Z (ZB110) System expands on the standard BurnerLogix Y System by combining boiler control functions with the same bu...
The Fireye NXF4000 is an advanced burner management controller with an internal flame safeguard, designed to operate burners firing liqui...
When combined with a Fireye flame safeguard system such as the BurnerLogix™ control, the PPC4000 offers a compact parallel position...
Fireye proudly presents the NX6100, an advanced fully integrated parallel positioning system. Designed to deliver unparalleled performanc...
Controls startup sequence and monitors flame for two individual burners
The Fireye Bi-Flame Monitoring System controls the st...
Plug-in Amplifier Modules permit the selection of ultraviolet, repetitive self-check ultra-violet, AUTOCHECK infrared, or rectification m...
MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process hea...
The Fireye PMSTR-6000 Plant Master offers sequencing and control for up to ten NX6100 or PPC6000 efficiency controls for steam and hot wa...
Fireye test unit Type 57AV7 Model 1000 provides a simple and convenient means to field-test the Fireye M-Series, M-Series II and Mic...
The Nexus training and demo units (NX-ATU-4000 or NX-ATU-6000) provide users with the ability to familiarize themselves with th...
The Fireye Model 57SB4-1000 Tester provides a convenient means for testing SB Series controllers and
sensors. It also is a good tool...
Fireye Flame Scanners provide a variety of UV and IR flame scanners that accurately detect the presence or absence of flame in a combustion chamber and some provide both self-check and non-self check capabilities.
The Fireye InSight II flame scanners incorporate two internal flame relays with adjustable ON/OFF thresholds and two 4-20 mA analog outpu...
The Fireye InSight Type 95DSS2 flame scanners incorporate an internal flame relay with adjustable ON/OFF thresholds, thereby eliminating ...
The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected. The &...
55UV5 self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane...
The UV scanner is ideally suited for gaseous fuels (natural gas & propane). However, it can be used in detecting flames from standard...
The UV tube is made of quartz and is filled with a gas that ionizes when struck by UV radiation from the flame. In the absence of UV radi...
The Fireye 25SU3-2100 also maximizes burner discrimination with its ability to accurately differentiate the pulse rates produced by ...
The Fireye 25SU5 Control enables the construction of integrated safety interlock systems for single and multiple burner fired apparatus i...
When powered by a compatible, self-checking Fireye control, the scanners detect the presence or absence of flames that emit ultraviolet r...
The Fireye VFS-2000 Turbine Sensor is designed to sense flame in extreme high pressure and hot environments such as those found on t...
The Fireye NED-GEAC-2000 Turbine Sensor is designed to sense flame in extreme high pressure and hot environments such as those found...
Auxiliary products compatible with Fireye combustion controls and burner controls.
Fireye auxilary products include displays, servos, actuators, switches and communication accessories.
Providing clear communication and easy-to-use interfaces for Fireye burner control products including our flame safeguard controls and efficiency control systems.
The BLPS, TS350 and TS752 series of pressure and temperature sensors are designed for use with the Nexus PPC4000 fuel air ratio cont...
The BLPS, TS350 and TS752 series of pressure and temperature sensors are designed for use with the Nexus PPC4000 fuel air ratio cont...
The FXIATS-140 stands out as a premier solution for measuring ambient air temperature with unparalleled precision and reliability, even i...
The inTouch Wireless Monitoring System was developed to communicate directly to you through the ...
The MB485ETH-CG can connect to multiple devices simultaneously on one of two serial ports. Devices wire in a daisy-chain and configuratio...
The NXESI120 interface is an advanced solution designed to integrate non-CANbus servo motors, such as the NX20, NX50, NX98, or other thir...
Use your PLC to connect to the FX Series servo using the Modbus RTU protocol via RS-485. Connect up to 10 servos in a point-to-point wiri...
The Fireye rotary actuator is a keypad programmable, direct coupled, modulating motor for use in burner and valve control systems. I...
DUNGS pressure switches complement Fireye’s range of flame safeguards, combustion efficiency and burner controls for a wi...
The NXTSD507HD and NXTSD512HD enhanced touchscreen interfaces offer expanded capability beyone what the standard NXD410TS keypad can offe...
The NXD410TS provides the means to setup, monitor and display information from the NXF4000 and PPC4000 series of controls as well as any ...
The Fireye NX6220 or NX6330 (with Ethernet) OLED (Organic LED) 12 key keypad displays provide an easy to read, bright operator inter...
The Fireye programmer modules—including EP100S, EP200S, EP300S (extended purge), EP160, EP161 (extended MTFI), EP163 (programm...
The Fireye E1R1, EUV1, ERT1, and EUVS4 Amplifier Modules are essential components of the Fireye View All
Fireye provides the SureFire™ igniter line for the reliable light off of large industrial burners and boilers in various utility applications.
SureFire Application Questionnaire
Fireye SureFire™ II High Energy Spark Igniters (HESI) are well suited to ignite most gaseous and liquid fuels, either by first igni...
The SureFire™ II HEP-2 is a battery powered portable spark igniter unit designed for safe hand operation. The portable spark ignite...
Fireye SureFire™ II High Tension Spark Igniters (HTSS) are designed to ignite a mixture of various types of gaseous fuels with air....
The Fireye SureFire™ II Natural Draft Gas Pilots are avalible with an outer diameter of either 32 or 48 mm, for intermittent or con...
The Fireye SureFire™ II Forced Draft Gas Pilots are avalible with an outer diameter of either 32 or 48 mm, for intermittent or cont...
The PMSTR-4000 Plant Master provides central control of a steam or hot water system for up to eight NXF4000 or PPC4000 control units. The...
Fireye Series D10-20 Burner Management controls provide ignition and main flame failure protection for automatically ignited oil and gas ...
The Paragon scanner provides high integrity sensing of multiple flame properties, including Amplitude, Flicker Frequency and Flame Learne...
Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a w...
Both Fireye® scanners utilize a software algorithm that constantly compares the amplitude-frequency characteristics of the...
The CM-420 Combustion Monitor can be used whenever an onboard means of oxygen monitoring is required. The CM-420 Combustion Monitor is al...
EPD160, EPD161, EPD167, EPD170, EPD260, EPD261, EPD270, EPD380, EPD381, EPD382, EPD390 programmers are designed for use with the
The NXTSD407 and NXTSD413 touchscreen displays were for use with the Nexus product family. They are offered in a 7” and 13.3&r...
The 12 joules of power delivered to the spark tip easily ignites the fuel. Three sparks per second are delivered. The High Energy SureFir...
The SureFire gas igniters are NFPA-rated as a Class 1, 2, or 3 igniter, depending on the application: Class 1 igniters are used for burne...