Flame Detection Products

 

Flame Detection

Fireye provides a variety of flame scanners which accurately detect the presence or absence of flame in a combustion chamber. Our scanners include advanced sensors and algorithms that can discriminate its target burner from adjacent flames in the same combustion chamber.

 Specifications:
• 45FS1: 700-2,500 nm (IR)
• 45UVFS1: 290-390 nm (UV)
• Supply voltage: 24 VDC
scanners
45FS1/45UVFS1

Features:
• Patented flame detection method
that "learns the signature" of 3
different fuels
• Keypad/display for programming or
learning flame information
• Remote communications capability
• Remote file select capability 

Specifications:
• Lead sulphide detector:
700-2,500 nm
• Supply voltage: 24 VDC
45RM4

Features:
• 16 position frequency selector switch
• Gain adjustment potentiometer
• 10 LED flame strength indicator

Specifications:
• Optical range: 190-270 nm
• Supply voltage: 120 VAC,
provided by 25SU3/25SU5
amplifier
• Available in NEMA (Class I,
Division 2, Group C and D)
and Cenelec approved
explosion proof housing
(EEx d IIC T6)
45UV5-1000

Features:
• Ultraviolet tube, sensitivity deep
in the UV range for improved
discrimination
• Adjustable sensitivity based on
position of UV tube

45UV5-1009

Specifications:
• Self-checking shutter assembly
• Optical range: 190-270 nm
• Supply voltage: 560 VAC
(supplied by control)
• Mounting threads: 1" NPT
• Operating temp: -40°C to 60°C
(-40°F to 140°F)
• Available in NEMA (Class 1, Div 2,
Group C and D) and Cenelec
approved explosion proof housing
(EEx d IIC T6)

• 4-20mA flame signal strength
analog output
• Supply voltage: 24 VAC/24
VDC
• Remote communications
capability via MODBUS or DF1
controls
25SU3/2000/2100/2150

 Features:
• Euro-rack design
• Keypad programmable
• Displays actual flame signal pulses
from 2 independent flame scanners
• Programmable scanner logic
• Programmable pull-in, drop-out, and
marginal alarm setpoints
• Selectable FFRT (1 to 6 seconds)

 
25SU5-5011/5012/5013

Features:
• Surface mount design
• Monitor up to 2 flame scanners
• Selectable FFRT
• Dual sensitivity (gain) settings
• 0-3 VDC flame signal strength
test jacks
• Marginal alarm (optional)
• Local LED flame strength indicator
(optional)
• 0-20 mA flame signal strength
analog output (optional)
• Supply voltage: 120 VAC/230 VAC
• High sensitivity/discrimination
amplifiers