Discrete Single Burner Flame Scanners

Fireye® provides a variety of flame safeguard and combustion efficiency products to the HVAC market place. The following Fireye flame scanners are used in conjunction with the appropriate Fireye flame safeguard controls to provide reliable flame detection on a variety of burner applications and fuel types. Anywhere you are trying to safely control a flame, you will find a Fireye control.

45uv5 Series (1005-1009) scanner

Self-checking ultraviolet scanners for continuously fired applications where recycling is infrequent or absent. The self-checking circuit checks the electronics and the UV tube for proper operation every four seconds during the firing period. Suitable for fuel gases and oil. Replaceable UV tube and (4-314-1) shutter mechanism (61-2914). Mounting 1" NPT or BSP pipe thread with 8 ft. (2.4m) lead wires. Must be installed with metal shielding over the scanner leads. Explosion- proof housings are available for models 45UV5-1005, 45UV5-1007, and 45UV5-1009.

55UV5 SERIES (1007, 1009) scanner

Fireye 55UV5 self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum distillates and diesel fuels and are suitable for use in Class I, Div. 2, Groups A, B, C, D and Class II, Div. 2 Groups F and G hazardous locations. These 55UV5 models are used only with the Flame-Monitor, D-Series, FlameWorx and MicroM control models to provide flame safeguard and monitoring systems for supervised manual, semi-automatic and fully automatic single burner boilers, process ovens and heaters.

UV90L scanner

The UV90L Series Scanners are designed for front and lateral (90°) mounting which, in some applications allow the scanners to obtain a clearer view of the flame. The UV90L, with its exclusive snugfit mounting block, eliminates the need for a threaded sight pipe.

uv1a Series scanner

Ultraviolet miniature non self-checking scanners. The UV1A is suitable for fuel gases and no. 2 oil. Non-replaceable tube. Mounting collar 1/2" NPT. Available with 3 ft (UV1A3), 6 ft. (UV1A6), or 50 ft. (UV1A50) of tray-rated cable. Explosion proof housings are available.


48PT2 Series scanner

Lead sulfide infrared scanners designed to detect low frequency IR signals from gas or oil flames. Mounting collar is 1/2" NPT with straight or 90 mounts (shown). Available with 4 ft (121.9m) or 8 ft (243.8m) flexible conduit. Replaceable 4-263-1 sensor cell.