Select a service
Fireye® provides a variety of flame safeguard and combustion controls to the HVAC market place. Our BurnerLogix®, Flame Monitor® and MicroM® families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired make up air units and commercial hot water heaters. Anywhere you are trying to safely control a flame, you will find a Fireye control.
The Fireye BurnerPROTM is a compact microprocessor based primary flame safeguard control for single burner applications. The control is designed to provide the proper burner sequencing, ignition and continuous flame monitoring for commercial/industrial heating and process equipment firing oil and gas fuels.MORE
BurnerLogix® Primary Safety Controls provide full function to basic control for all your application needs. BurnerLogix is a small and compact package filled with big features and huge benefits.Burnerlogix Y provides primary flame safeguard while the Z model adds boiler control to the integrated flame safeguard.MORE
The Flame-Monitor® Flame Safeguard Series provides the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas and combination fuel burners. On a safety shutdown, the display module will advise the operator that the control is in "Lockout" and indicate the cause as well as the position in the operating sequence that it occurred. CUTSHEET BULLETIN
The Fireye MicroM® Flame Safeguard controls are compact, modular burner management systems designed to provide automatic ignition and continuous flame monitoring for commercial sized heating and process burners firing any type of fuel.
Fireye Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners.
The Fireye MB SERIES control has been engineered to meet the operational, safety and reliability requirements demanded by the industrial process heat market. It is a fully integrated control, complete with all functions built into one module, offering the opportunity to greatly reduce cost and space requirements normally required by other non-integrated systems. CUTSHEET BULLETIN
The Fireye MBPF-100S and MB600PF provide visual indication and relay output that signal the user regarding flame presence in a combustion chamber. Unique to the module is its ability to use UV or flame rod or both simultaneously.The modules use an inexpensive socket for mounting.
The inTouch Wireless Monitoring System was developed to communicate directly with up to ten (10) Flame-Monitor or MicroM flame safeguard controls. In the event of a lockout the inFormation is transmitted to you through the nationwide cellular network, AMPS (Advanced Mobile Phone System), eliminating the need for costly telephone lines. And because inTouch is a cellular device, inStallation time is greatly reduced.MORE